Twisted Wire Brushes

A twisted wire brush is known by many names, including: twisted-in-wire, spiral, tube, flue, bottle, pipe, boiler, and power brush. These names all represent the same brush construction, where a piece of wire is doubled over, and the fill material is inserted between the fold of the wire stem. The wire stem is then twisted into a brush. The fill material can also be located at one end of the brush, with the handle extending from it. In addition, the fill can be centered in the wire, with two long ends, one on each side.

The inserted fill material can be made using wire, natural, or synthetic fibers. The end of a twisted wire brush can vary considerably: cut tips, rounded tips and filled tips. Gordon Brush’s brushes also offer the option of having a long or short-ended handle, with end ring, loop or cut end to be used with power tools.  

4-in-1 Double-Ended Tube/Fitting Brushes

(2)

4-in-1 Double-Ended Tube/Fitting Brushes (2)

Abrasive Spiral Brushes

(17)

Abrasive Spiral Brushes (17)

Abrasive Spiral Power Brushes

(23)

Abrasive Spiral Power Brushes (23)

Brush Holders for Side Action Brushes

(2)

Brush Holders for Side Action Brushes (2)

Condenser Tube Brushes

(92)

Condenser Tube Brushes (92)

Duct and Flue Brushes

(10)

Duct and Flue Brushes (10)

Handles and Extension Rods for Threaded Brushes

(15)

Handles and Extension Rods for Threaded Brushes (15)

Micro Spiral Brushes

(60)

Micro Spiral Brushes (60)

Radiator Brushes

(2)

Radiator Brushes (2)

Refrigeration and Plumbing Brushes

(10)

Refrigeration and Plumbing Brushes (10)

Ring Handle Spiral Brushes

(188)

Ring Handle Spiral Brushes (188)

Side Action Paddle Brushes

(68)

Side Action Paddle Brushes (68)

Spiral Power Brushes

(253)

Spiral Power Brushes (253)

Spoke Brushes

(2)

Spoke Brushes (2)

Thread Cleaning Brushes

(36)

Thread Cleaning Brushes (36)

Valve Brushes

(4)

Valve Brushes (4)

Not sure which twisted-in-wire brush you need for your business?

Our customer service representatives can answer your questions. Call us at: 1-800-950-7950 or 1-323-724-7777

Gordon Brush® offers 16 categories of twisted wire brushes. These brushes are available with wire, natural, or synthetic fill material. In addition, other attributes such as stem material; stem style; spiral style; stem diameter; bristle diameter, brush length; overall length; and brush diameter are also selectable.

Commonly referred to as twisted-in-wire brushes, other names include twisted wire tube brushes, bottle brushes, pipe brushes, twist brushes, internal cleaning brushes, and spiral wire brushes. They are suitable for both hand-held use and for use in power tools like drills, drill presses, and CNC machining centers. For your convenience, this brush type comes in wholesale packages as well.

General applications for this stock brush include cleaning, de-burring, polishing, reaming, finishing or removing debris or burrs from internal non-metallic and metallic surfaces. Specific applications for twisted-in-wire brushes include: cleaning internal tubing and piping and cylinders; de-burring machined and threaded holes in castings, tanks and machined parts; abrasive brushes for tough slag removal; cleaning medical devices and equipment; cleaning laboratory equipment and beakers; cleaning hydraulic fittings and nozzles; shotgun, pistol and rifle cleaning; whisper light brushes for cleaning electronic and computer components; used to dissipate lightning; remove gases during vacuum distillation process; used in removing water bubbles in air fluid control; clean refrigerator coils; clean valve guides; and clean automotive and aircraft parts.

Contact Gordon Brush® today at 323-724-7777 or [email protected]. Our team of customer service representatives can help you select the perfect spiral/twisted-in-wire brush for your job. If you can't find what you need, Gordon Brush® can create a custom twisted-in-wire brush in a full range of sizes from miniature to several inches in diameter. Twisted in wire brushes can be manufactured with features including grip handles, wire-loop handles or screw-on threaded pipe nipples depending on the application.